How to Install Standoffs Screws for Hanging Signs?

For the wide rectangle or square-shaped signs, you'll need four standoffs each at the corners. You may also place one standoff each at the bottom and the top for added support. If you choose a customized contour cut shape for your signage, you can customize the placement of the screw as per your desire.

For the installation of the customized sign-

Take measurements for drilling the holes
Lightly mark the wall with a pencil
If you have ordered signs with pre-drilled holes, hold it on the wall mark with a pencil for drilling
Maintain the level on the wall for a straight mounted sign
Insert the anchor by drilling a small hole
Place the standoff over the anchor
Drill the screw into the anchor through the hole on the back of the standoff
Between the back of the signage and at the end of the screw, place the plastic washer and hold the holes of the pre-drilled signage
Finally, thread the standoff screw cap into the standoff housing with a second plastic washer on the front side of the signage
Order Your Custom Standoff Screw Signage with our
For a clean and classy wall graphics, the screw signs are the best choices available. our offers a range of options when it comes to signages. The acrylic signs are the most popular one that gives your signages a 3D look.