Suspended Cable Display Systems

They have been specially designed by us to offer aesthetic styling combined with unusual versatility and rapid installation. This is achieved by the swivel feature incorporated into the top and bottom cable anchor fittings. The result is that our cable kits can easily be attached either to the wall - or fixed floor to ceiling, for example in cable window displays.

The basics of our cable display systems for windows or walls:
Cable display is just another name for a wire display system. The cables or wires are made of strong slender steel to provide an unobtrusive support. The wires are supplied with a cylindrical termination bonded onto the top of the cable. This vertical support wire is installed securely in the upper ceiling or wall fixing. The fitting incorporates a spring for tensioning.
The lower anchor fitting incorporates a gripper mechanism - the wire simply needs to be inserted and pulled tight. The wire is grabbed automatically. This is a superior solution to most competitor systems in which a separate lower termination has to be fitted by the installer at exactly the right height for the room in question. This can be very fiddly and is unecessary in our cable display systems.

All cable fittings have a matte silver finish which gives a discreet contemporary look.
Our cable kits come complete with wires, pockets and all fixings. Kits are available to order online in many pocket sizes and configurations. However, the individual components can also be purchased if you want to create a special design or are looking for spare parts for cable displays.
How to install cable display systems
Cable displays need to be fixed securely and setting out must be done accurately. Often installation is regarded as a job for the professional or keen DIYer. A reasonable level of practical skill is required. The tools needed are an electric drill, screwdriver, tape measure, good wire cutters and preferably a spirit level. More detailed assembly instructions are provided adjacent to the individual products in this section.
In all cases the responsibility of anchoring the cables rests with the installer as we cannot determine what type of wall or ceiling will exist at your premises.